Architectural Style Outdoor Hammock Stand
This steel hammock stand is custom made and works for hammocks of all sizes. The stand has a weigh capacity of over 600 pounds and is handmade here in the USA.
The development of this hammock stand was done to fill the void between cheap, throw-away hammock stands and permanent set posts or trees. This stand offers a sleek design, something that looks intentional and adds to the aesthetics of the surrounding decor. It also offers a heavy duty construction, a design that doesn’t flex under heavy loads, won’t blow away during wind storms, and can be leveled to accommodate uneven ground. As the saying goes “buy once, cry once”, this stand is not the cheapest option, but it also won’t ever need to be replaced, and is sure to be the focal point for any hammock lovers.
***FINISH***
It comes with an outdoor rated powder coated finish. Not all powder coated finishes are equal! Our metal stand is mechanically stripped, prepped with an iron phosphate solution, powder coated with a zinc rich primer base, then powder coated with a topcoat color of your choosing. Metallic colors will also come with a clear powder coated topcoat over the color choice.
***HARDWARE***
The stand comes with the necessary hardware to assemble the stand, including leveling feet, as well as J-hooks for the hammock to hang from. Hammocks typically come with their own hanging chain or rope, so that is not included with the stand, but can be included upon request.
***MEASUREMENTS***
The stand is measured by the size of the hammock + 18″ between the mounting hooks. So for example, the stand for a 12′ hammock would measure approximately 162″ between the hooks, and the overall stand is about 6″ longer than that from point to point. The mounting hooks are approximately 46″ of the ground. The cross bar is 8″ off the ground.
