Sale!

Curved Arch Style Metal Table Base

Starting at Original price was: $865.00.Current price is: $778.50.

Custom metal table base for round or square tops made from wood, stone, or glass | Dining, coffee, conference tables, and more! | Buy now for free shipping!

$

Powder Coat Options for Metal Table Legs and Table Bases

 

 

Painted Options for Metal Table Legs and Table Bases

Quick Sizing Guide for Metal Table Legs and Bases

Width

A quick, general rule of thumb is to take the overall width of your tabletop and subtract 24″ to get the width of your table base. Make sure the legs do not go below these minimum widths:

  • Dining heightย – 20″ width minimum
  • Counter heightย – 24″ width minimum
  • Bar heightย – 28″ width minimum

For any metal table base designs that taper in at the floor, add 6-8″ to the above minimums for the minimum base width since the width is measured at the widest point of the base, at the top, and they taper in 6″ to 8″ at the floor.

Length (if applicable)

Some of our metal trestle bases are intended for use with square or round tops, so the “width” of the base is a measure of the overall diameter of the base and length is not an option. For base styles that specify both width and length, the length of the base will depend on how much overhang your tabletop can support. As a general rule of thumb, follow the below max overhang recommendations for the below top materials:

  • Wood Topย – Top length minus 36″
  • Stone Topย – Top length minus 24″
  • Glass Topย – Top length minus 24″

Top thicknesses and strengths vary, so it is ALWAYS best to get a recommendation from the fabricator of your tabletop for overhang allowances. Also make sure the length of the base does not drop below the above width minimums for stability.

Height

  • Dining heightย is finished at 30″, so subtract the thickness of your tabletop from 30″ to get the height of the table base. Round down to the nearest inch to account for the included leveling feet.
  • For counter height, subtract the thickness of the tabletop from 36″.
  • For bar height, subtract the thickness of the top from 42″.

Coffee tables, side tables, and bench bases

  • You typically want the width of the base for smaller sized builds to be just a couple inches smaller than the top.
  • Benches typically have a finished height that is 12″ less than the table height. So subtract the thickness of the top from this measurement to get the height of the base.
  • Coffee tables typically have a finished height equal to, or a couple inches below the surrounding seating height. Usually around 18″ to 20″ tall.
  • Side tables typically have a finished height equal to, or slightly below the surrounding arm rest height of nearby seating.

Tubing Size

  • 1″ tubeย – Reserved for small, lightweight tables, such as side tables or coffee tables
  • 1.5″ or 1×2 rectangular tubeย – Suitable for smaller tables, dining tables with a minimalistic style, or bench bases
  • 2″ or 1×3 rectangular tubeย – Most common size material, suitable for most applications
  • 3″ or 2×3 rectangular tubeย – Suitable for heavier or larger tabletops, or where a more prominent look is desired for the metal table base
  • 4″ or 2×4 rectangular tubeย – Gives a massive look to the table base, suitable for the heaviest and largest of tabletops.

For a more complete guide, see ourย Base Sizing Guideย for more information or feel free toย Contact Usย for more our recommendation.

Curved Arch Style Metal Table Base

The Curved Arch style metal table base is an excellent choice for round or square tops made from wood, stone, and even glass. The base can be made to work for coffee tables, side tables, end tables, dining tables, conference tables, and even cafe or pub tables. Blending modern and traditional architectural accents into this base design ensure a seamless design style that can be paired with just about any design style and decor.

The metal pedestal base comes with felt pads for floor protection and slotted mounting holes in the top plate for expansion and contraction of wood tops. This metal pedestal base is made from 1×3 rectangular tubing for the lower frame with 3×3 square tubing for the vertical piece, 3/8″ x 2.5″ flat bar for the rolled arches, and a 1/4″ thick top mounting plate. For glass top applications, the holes in the top plates are omitted and clear adhesive backed rubber bumpers are included for the glass to rest on.

For a more traditional and economical pedestal base, see our Rectangular Style Metal Pedestal Base

All products undergo extensive quality control checks to ensure your products are made as specified and come free of any defects or sharp edges. Pleaseย Contact Usย if you have any questions about the sizing, details, or applications of these legs. Made in the USA, with US sourced steel. See ourย Base Sizing Guideย for more information on how to properly size your metal table base for your application.

Donโ€™t see what youโ€™re looking for?ย Contact Usย if the size you are looking for is not shown, or if you would like to discuss making something custom. See ourย Finishesย page for more information on the various finish options we offer, such as painted, powder coated, brushed and polished stainless steel, and more