Sale!
Hourglass Style Polished Stainless Steel Table Base
20200414_143639
20200414_143527
20200414_143501
Hourglass Style Polished Stainless Steel Table Base
20200414_143447
20200414_143414
20200414_143358
20200414_143222
Hourglass Style Polished Stainless Steel Table Base
20200414_143639
20200414_143527
20200414_143501
Hourglass Style Polished Stainless Steel Table Base
20200414_143447
20200414_143414
20200414_143358
20200414_143222

Polished Stainless Steel Hourglass Style Table Base

Starting at Original price was: $2,810.00.Current price is: $2,529.00.

Custom made polished stainless steel table base all applications | Works for round or square tops from wood, stone, or glass | Buy now for free shipping!

$
SKU: 107208 Category: Tags: , , , ,

Quick Sizing Guide for Metal Table Legs and Bases

Width

A quick, general rule of thumb is to take the overall width of your tabletop and subtract 24″ to get the width of your table base. Make sure the legs do not go below these minimum widths:

  • Dining height – 20″ width minimum
  • Counter height – 24″ width minimum
  • Bar height – 28″ width minimum

For any metal table base designs that taper in at the floor, add 6-8″ to the above minimums for the minimum base width since the width is measured at the widest point of the base, at the top, and they taper in 6″ to 8″ at the floor.

Length (if applicable)

Some of our metal trestle bases are intended for use with square or round tops, so the “width” of the base is a measure of the overall diameter of the base and length is not an option. For base styles that specify both width and length, the length of the base will depend on how much overhang your tabletop can support. As a general rule of thumb, follow the below max overhang recommendations for the below top materials:

  • Wood Top – Top length minus 36″
  • Stone Top – Top length minus 24″
  • Glass Top – Top length minus 24″

Top thicknesses and strengths vary, so it is ALWAYS best to get a recommendation from the fabricator of your tabletop for overhang allowances. Also make sure the length of the base does not drop below the above width minimums for stability.

Height

  • Dining height is finished at 30″, so subtract the thickness of your tabletop from 30″ to get the height of the table base. Round down to the nearest inch to account for the included leveling feet.
  • For counter height, subtract the thickness of the tabletop from 36″.
  • For bar height, subtract the thickness of the top from 42″.

Coffee tables, side tables, and bench bases

  • You typically want the width of the base for smaller sized builds to be just a couple inches smaller than the top.
  • Benches typically have a finished height that is 12″ less than the table height. So subtract the thickness of the top from this measurement to get the height of the base.
  • Coffee tables typically have a finished height equal to, or a couple inches below the surrounding seating height. Usually around 18″ to 20″ tall.
  • Side tables typically have a finished height equal to, or slightly below the surrounding arm rest height of nearby seating.

Tubing Size

  • 1″ tube – Reserved for small, lightweight tables, such as side tables or coffee tables
  • 1.5″ or 1×2 rectangular tube – Suitable for smaller tables, dining tables with a minimalistic style, or bench bases
  • 2″ or 1×3 rectangular tube – Most common size material, suitable for most applications
  • 3″ or 2×3 rectangular tube – Suitable for heavier or larger tabletops, or where a more prominent look is desired for the metal table base
  • 4″ or 2×4 rectangular tube – Gives a massive look to the table base, suitable for the heaviest and largest of tabletops.

For a more complete guide, see our Base Sizing Guide for more information or feel free to Contact Us for more our recommendation.

Polished Stainless Steel Hourglass Style Table Base

Our Polished Stainless Hourglass Base is a contemporary, made-to-0rder metal base that is sure to be a showstopper, used for dining tables, kitchen tables, conference tables, and more. The polished, chrome-like mirror finish combined with the angles and geometry of the base create a mesmerizing pattern of reflections throughout the base. This base is fully welded, requiring no assembly, and works for wood, stone, or glass tops. The base offers a central supporting design, and is best paired with round or square tops, or multiple bases can be used together for longer rectangular tops.

Our polished stainless products are hand sanded for hours with progressively finer grits, up to a 6,000 grit, then hand buffed to create the mirror finish. Polished stainless steel finishes are superior to chrome in that the finish will never chip off, the base metal will not corrode under the finish, and the finish can be repaired in the event of damage or scratches. If you are looking for this base with a painted or powder coated finish, see our Hourglass Style Metal Table Base.

This stainless steel table base comes by default with mounting tabs with slotted holes for mounting to the table top. For glass top applications (pictured), the base is made without mounting tabs or holes and includes adhesive backed rubber bumpers for the glass to rest on. The base also comes with felt-tipped leveling feet for floor protection.

All products undergo extensive quality control checks to ensure your products are made as specified and come free of any defects or sharp edges. Please Contact Us if you have any questions about the sizing, details, or applications of these legs or see our Base Sizing Guide for additional information.

Don’t see what you’re looking for? Contact Us if the size you are looking for is not shown, or if you would like to discuss making something custom.

You may also like...